MAX.500GB Formatted Capacity Per Disk
Serial ATA 3.0Gbps Interface Support
Improved recording stability over temperature with PMR
Advanced dynamic FOD control for best data integrity
Intelligent compensation of external disturbance
SATA Native Command Queuing Feature
Device Initiated SATA Power Management
Rotational vibration sensor
Environment friendly product with RoHS compliance
Improved performance with dual-ARM based firmware
ATA S.M.A.R.T. Compliant
ATA Automatic Acoustic Management Feature
ATA 48-bit Address Feature
ATA Device Configuration Overlay Feature
NoiseGuard™
SilentSeek™

    General

Width	101.5 mm
Length	147.0 mm
Height(max.)	26.1 mm

    Drive Configurations

Capacity*	500 GB
Interface	Serial ATA 3.0Gbps
Buffer DRAM Size	16 MB
Byte per Sector	512 bytes

    Performance Specifications

Average Seek time(typical)	8.9 ms
Average Latency	4.17 ms
Data Transfer Rate / Media to/from Buffer(Max.)	250 MB/sec
Data Transfer Rate / Buffer to/from Host(Max.)	300 MB/sec
Drive Ready Time(typical)	10 sec

    Reliability Specifications

Non-recoverable Read Error	1 sector in 10^15 bits
Start/Stop Cycles	50,000

    Acoustics

Idle	2.5 Bel
Performance Seek	2.8 Bel

    Environmental Specifications

Temperature / Operating	0 ~ 60 °C
Temperature / Non-operating	-40 ~ 70 °C
Humidity(non-condensing) / Operating	5 ~ 95 %
Liner Shock(1/2 sine pulse) / Operating	70 G
Liner Shock(1/2 sine pulse) / Non-operating	350 G
Altitude(relative to sea level) / Operating	-300 to 3,000 m
Altitude(relative to sea level) / Non-operating	-300 to 12,000 m

    Power Requirements

Voltage	+5V±5%, +12V±10%
Spin-up Current (Max.)	2.0A
Seek (typical)	4.8W
Read/Write (typical)	5.1W
Idle (typical)	3.9W
Standby (typical)	1W
Sleep	1W