INTERCEPTOR

The Interceptor from Xilence represents an HPTX case of the very best quality. Hot Swap SSD/HDD support, space for a triple radiator, countless cable and hose routes as well as ten PCI slots all come together ro present an unprecedented combination of practical case features. All of the possible case vents draw the fresh air through air filters - this allows you to have continuous fun with your clean, highly capable system. Sufficient space for perfect cable management can be found between the rear wall of the motherboard and the side panel of the case. Four DVD slots are located in the front along with a total of ten Hot Swap bays, into which you can install six 2.5 or 3.5" and four 2.5" drives, depending on your preference. These drives are cooled by two 120mm fans located in the door in front of the drive slots. The upper section houses USB 2.0 and 3.0 connections, audio inputs and outputs as well as a power and a reset button. The air output can be adjusted using a slide control.

Hot Swap Any hardware enthusiast is used to make regular changes to hardware solutions. Switching hard drives is particularly difficult and might also be risky. Data is often lost, as the sensitive SATA sockets break off or the drive itself is shaken too much during insertion or removal. The Interceptor solves this problem with numerous Hot Swap inserts. The drives are fixed into installation frames and can be slotted in from outside with ease. The data connections and energy supply are established automatically. So, there is no need to open the case.

Air Filters In order to keep the system working both quietly and for longer, all of the sucking fans only draw filter air into the inner part of the case. These filters can be removed and cleaned without any great effort. Air filters are located: In the front In the side panel Under the power supply

Cramped conditions quickly erode your desire to set up your system. To make sure that doesn't happen, the Interceptor case offers space for motherboards in the HPTX format. Endless cable routes and the cable management on the rear side of the case make sure that order can be maintained. Perfect cable management using: Fixing loops to hold the cables Countless cable routes Space between the motherboard rear wall and the side panel

Support for a 360mm radiator and/or three 120mm fans. Possible combinations: 1x 360mm radiator 1x 240mm radiator 1x 120mm radiator + 1x 120mm fan

General