Call us 023 9232 2500
Monday - Saturday, 9am - 5pm
Desktop PCs
Laptops
PC Components
Monitors
Peripherals
Network & Servers
Gaming
More
For Work
Deals!
Collection
You may also like...
Arctic Freezer 13 CPU Cooler
Order Code: ARC-FREZ13
Manf.Code: F13
Arctic Cooling Freezer 13
Carries on the legacy of the renowned Freezer 7 Pro Rev.2 to continue providing efficient and low noise CPU cooling solution for enthusiasts. The maximum cooling capacity of this newly improved cooler is 200W. In combination of wide compatibility with AMD and Intel sockets and superior cooling performance, the Freezer 13 ultimately brings overclocking to a new level.
Advanced Cooling and Inaudible Performance
Featuring four U-shaped high performance heatpipes and 45 efficiently formed aluminum fins; the Freezer 13 is able to dissipate massive heat that is produced in high-end CPUs, such as Intel Core i7. To facilitate the process of removing waste heat, the Freezer 13 is equipped with an ultra-quiet 92mm PWM fan. The fan speed runs from 600 to 2000 RPM to keep components within their safe operating temperature limit.
User-Friendly Mounting Mechanism
Installing Freezer 13 cannot be any easier. With ARCTIC’s own design of push pins, mounting the cooler on to the system is quick and simple. The mounting system is very convenient as it fits on all current platforms – it is unnecessary to take apart the main board. Its sturdy mounting frame is able to withstand the weight of the Freezer 13, even under worst conditions, such as a drop test. A layer of ARCTIC MX-4, the latest thermal compound by ARCTIC, has been pre-applied to facilitate the process of installation as well.
| Intel i7 LGA 1366 | Yes |
| Intel i3/i5/i7 LGA 1156/5 | Yes |
| Intel LGA 775 | Yes |
| AMD AM3 | Yes |
| AMD AM2+ | Yes |
| AMD AM2 | Yes |
| AMD 939 | No |
| AMD 754 | No |
| Rated Fan Speed | 600 - 2000 RPM |
| Air Flow | 36.4 CFM |
| Weight | 695 g |
| Noise Level | 0.5 Sone |
| Thermal Resistance | N/A |
| Width | 96 mm |
| Depth | 123 mm |
| Height | 130 mm |
| Width | N/A |
| Depth | N/A |
| Height | N/A |
Why not Tell A Friend about this product, all you need to do is fill out their information below and click send.
Your Name
Your Email
Friends Name
Friends Email
Personal Message
2012-05-20
Product Rating:
this cooler is the biz installed in less than 10 mins. i have got an amd x4 640 idle temps are just 17 degrees when all cores are under max load the temps only reach 40 degrees i have installed an extra 120mm case fan behing the heatsink and the pc is running great no more restarting hurray
Reviewed Posted by: wattsy,
Southampton
2012-04-29
Product Rating:
Bought this to replace my stock cooler on my FX6100 and what a difference. Stock speeds of 3.3GHz went from 45degrees idle to 28degrees idle at 4.1GHz and only 45-48 degrees under load. Easy to install on the AM3 Boards, only downside is you need to remove the fan from the heat sink to screw in the front clip. I managed to snap the clip in the process but nothing some super glue can't fix. Intel users will need to remove the mobo and replace the backplate, AMD users are fine, it uses the current one. Highly recommended and a very efficient product.
Reviewed Posted by: Martin Parsons,
Chippenham
2012-02-24
Product Rating:
I have an amd x4 phenom clocked to 3.4. Idle temps using this cooler are 29c but when under load the temp goes upto about 51c but that's probably down to poor air circulation in my case and my over clocking Under general use (typing documents etc) my temp doesn't go over 34 so it depends what you intend on doing with your pc. However it is much much quieter that the stock cooler and I am very impressed with this product .. It can be fiddley to install on an amd motherboard I suggest taking your mobo out of the case unlike me who tired for an hour to fit it while my mobo was still in the case. Oh and the little metal brackets that you use for amd motherboards attach it to the cooler first .... Quite loosely I mean as angling a CPU cooler with a separate bracket and tiny screws can get annoying and be time consuming. But all I all I do like my product and am very happy with it.
Reviewed Posted by: Lee smith,
Weston super mare
2012-01-12
Product Rating:
Fantastic CPU cooler, swapped my stock 2500k HSF over for this and am now getting 10oC lower idle temps and will not go above 50oC no matter how hard I push the CPU with Prime 95 (CPU is O/C'd). For the price I cannot recommend this strongly enough. Installation is also a piece of cake with no MB backplate required.
Reviewed Posted by: Toby,
Reading, UK.
2011-07-06
Product Rating:
Easier to fit than the majority of coolers, plus it will fit almost any socket type, a bonus should you change your machine at some point. The only minor drawback is that it can only be fitted to face in two direction rather than four.
Reviewed Posted by: Anonymous,
2011-05-26
Product Rating:
With this my QX9650 runs over 20 Celsius cooler than with the standard heatsink, which has let me significantly overclock it. Highly recommended.
Reviewed Posted by: PetrolDave,
2011-04-20
Product Rating:
Absolutely silent and keeps cpu cold even under extreme use
Reviewed Posted by: Asus PC Build,
2011-04-12
Product Rating:
CPU down from 60C on stock cooler to 30C @ 4.5GHz overclock, impressive.
Reviewed Posted by: RL,
2011-03-14
Product Rating:
realy great cooling for the price and quite, it comes with high grade cpu paste and all the fittings making it easy to install. another thing that is good it can be used in a wide range of cpu''s so if your going to upgrade your computer you will already have a great cooling product.
Reviewed Posted by: Anonymous,
