I upgraded from the Corsair H50 and im not dissapointed. My load temps have dropped by about 10c and idle temps are slightly lower too. The pump looks great once fitted with its white LED's and the radiator is slim enough to fit in the top of the Corsair 600T SE. The only problem is the pump noise. Mine is making a horrible gurgling and crunching noise...a bit like an old broken HDD. Once i looked on google, I quickly realised most H100 owners had the same problem! i found out this can be fixed by buying a molex to 3 pin cable and reducing the voltage slightly with a fan controller and then the pump is dead silent (novatech dont sell these adaptors) Overall i'd recommend the product but only if you can get hold of an adaptor to get rid of the pump noise problem. Also the fans supplied with the H100 are very loud under load at full speed. Do yourself a favour and buy some Scythe Gentle Typhoon 1850RPM fans instead.

well what can i say.... perfect little unit, keeps my 4.36ghz (1.31v) FX-8120 8-core at around 8c-10c idle core temps, and havnt seen it peek above 33c core temps during quite heavy usage (60% - 87% constant usage) have been trying to fight off the urge to buy hydro systems/kits for a while, but this is the perfect solution... no maintenance, low cost compared to full custom loops etc, low power draw etc , and also that means there is not a 4lb heatsink bending my motherboard and other components can now breath properly, very impressed ! also a big thanks to Tom @ Portsmouth branch for all the help and assistance with returns etc, yet another brilliant service provided by novatech. thanks guys!

Ive had this cooler for about 2-3 weeks and I'm not disappointed one bit, it's fantastic. I'm running a seconed gen i7 clocked at 3.4. Idle temps are 28-30 and I never see it go over 45 when stressed. I had to fiddle about with the radiator so that it would fit to the top of the case, but that was due to my mother boards components being awkward. The case that I'm using is a Fractal Design R3.