The F3 operates at 7200RPM with offerings of up to 1TB data storage capacity by using two 500GB per platter disks. As well as meeting datacentre requirements for addition storage to meet rising demand and increasing performance needs, the new drives also deliver high-performance with lower power for desktop computers and servers.

Features

• Serial ATA 3.0 Gbps Interface Support
• Improved recording stability over temperature with PMR
• Advanced dynamic FOD control for best data integrity
• Intelligent compensation of external disturbance
• SATA Native Command Queuing Feature
• Device Initiated SATA Power Management
• Rotational vibration sensor (Optional)
• Environment friendly product with RoHS compliance
• Improved performance with dual-ARM based firmware
• ATA S.M.A.R.T. Compliant
• ATA Automatic Acoustic Management Feature
• ATA 48-bit Address Feature
• ATA Device Configuration Overlay Feature
• NoiseGuard™
• SilentSeek™

    General

Width	101.5 mm
Length	147.0 mm
Height(max.)	26.1 mm

    Drive Configurations

Capacity*	1 TB
Interface	Serial ATA 3.0Gbps
Buffer DRAM Size	32 MB
Byte per Sector	512 bytes

    Performance Specifications

Average Seek time(typical)	8.9 ms
Average Latency	4.17 ms
Data Transfer Rate / Media to/from Buffer(Max.)	250 MB/sec
Data Transfer Rate / Buffer to/from Host(Max.)	300 MB/sec
Drive Ready Time(typical)	10 sec

    Reliability Specifications

Non-recoverable Read Error	1 sector in 10^15 bits
Start/Stop Cycles	50,000

    Acoustics

Idle	2.5 Bel
Performance Seek	2.8 Bel

    Environmental Specifications

Temperature / Operating	0 ~ 60 °C
Temperature / Non-operating	-40 ~ 70 °C
Humidity(non-condensing) / Operating	5 ~ 95 %
Liner Shock(1/2 sine pulse) / Operating	70 G
Liner Shock(1/2 sine pulse) / Non-operating	350 G
Altitude(relative to sea level) / Operating	-300 to 3,000 m
Altitude(relative to sea level) / Non-operating	-300 to 12,000 m

    Power Requirements

Voltage	+5V±5%, +12V±10%
Spin-up Current (Max.)	2.0A
Seek (typical)	4.8W
Read/Write (typical)	5.1W
Idle (typical)	3.9W
Standby (typical)	1W
Sleep	1W