Kingston HyperX Impact 8GB (2x4GB) DDR4 PC4-17000 2133MHz SO-DIMM Kit overview
Make an Impact in your game with powerful HyperX® Impact DDR4 SODIMM. It automatically overclocks to the highest frequency published, up to 2666MHz1 , without the need to adjust system BIOS settings, to support platforms that use Intel’s latest CPU technologies. You get instant top-level performance with lower voltage that helps your system run cooler, quieter and more efficiently. All you’ll ever miss is lag time. HyperX Impact DDR4 has a slim form for easy installation in slim or ultra slim notebooks and features a sleek black design with a matching black PCB that adds an aggressive look.
Fast and powerful performance
With speeds of up to 2666MHz, capacities of up to 16GB and CL13–CL15 timings, HyperX Impact SO-DIMM keeps you ahead of the curve with the latest advances in mobile DRAM technology. It’s tested for compatibility with DDR4 chipsets on leading motherboards.
Plug and play
Installing HyperX Impact DDR4 is easy and hassle-free. It’s plug and play and automatically overclocks to the highest frequency published, with no need to adjust BIOS settings.
Low DDR4 1.2 voltage
DDR4’s low 1.2 voltage draws less power and generates less heat for quiet computing and an extended battery life.
Slim form and sleek design
HyperX Impact DDR4 SODIMM’s sleek black thermal label and matching black PCB give it an aggressive look. Its slim form factor makes it ideal for notebooks, SFF
100 per cent factory tested
Lifetime warranty, free technical support
1 HyperX DDR4 PnP memory will run in most DDR4 systems up to the speed allowed by the manufacturer’s system BIOS. PnP cannot increase the system memory speed faster than is allowed by the manufacturer’s BIOS
HyperX HX421S13IBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2133 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit DDR4 FBGA components. Total kit capacity is 8GB. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. This module has been tested to run at DDR4-2133 at a low latency timing of 13-13-13 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
PnP JEDEC TIMING PARAMETERS:
DDR4-2133 CL13-13-13 @1.2V
XMP Profile #1: DDR4-2133 CL13-13-13 @1.2V
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD = 2.2V to 3.6V
On-Die termination (ODT)
16 internal banks; 4 groups of 4 banks each
Bi-Directional Differential Data Strobe
8 bit pre-fetch
Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
Height 1.18” (30.00mm)