Ultra High Quality Aluminium Construction, Up To 5 x 5.25" & Up To 10 x 3.5" Drive Bays, Supports Full ATX & Below Motherboards
Sorry, this product is no longer available to purchase.
The Ultimate Workmanship
Lian Li has more than 20 years experience, and continues to develop innovative and sought after products in the traditional quality and style they are renowned for. Lian Li has persisted to make products in Taiwan, and uses the highest quality material as well as the most advanced techniques in the manufacturing process in order to provide modern, durable high-quality goods. | |
"Quality" always is the essence of Lian Li's products, since 1998 when Lian Li offer the first all aluminum chassis to the market. Since then, Lian Li exemplifies the same quality standards, ensuring durability and craftsmanship come first. All products are manufactured in Taiwan and distributed to worldwide markets. | |
Lian Li standards ensure the utmost effort goes into the external finishing, where all the external parts are hair-line brush anodized aluminum in keeping with Lian Li’s classical style. | |
Lian Li - Excellent Design
Lian Li have always put a lot of effort on it's product with latest manufacture techniques. In some process, Lian Li still asserted in using hand craft to in certain steps in production. Because of some unique techniques can't be replace by machines, and it is how much effort Lian Li has put into it's product. | |
The PC-B71 is the case which functionality and style converge, features the upright removable E-ATX motherboard tray, anti-vibration HDD racks, two14cm blue LED silent intake fans with filter in the front, other two12cm silent intake fans in the back, top mounted multi-media I/O ports, and the graphics card holder, and lots more – because when it comes to your comfort, every detail counts | |
User Interface is very important in Lian Li chassis. The external fixture, user interface, and the internal structure all has been tested to meet Lian Li’s high quality standard. In 2009 Lian Li launched the new PC-B71, with all aluminum alloy chassis, round edge design with stylish look. PC-B71 has hair-line brush anodized aluminum finishing with diamond cut detail. | |
Fine Craft Products
Huge internal space fits E-ATX motherboards, and graphics cards, which can be up to 345mm long, and there is room for 10 hard drives also there is space for dual power supply units. There are 2 x 12cm and 2 x 14cm cooling fans to cool the system down, and a lot of internal space for liquid cooling system. It is an ideal for gamers and pro users! | |
All new PCI lock design, switch the lock off , install the extra card then switch it on. Easily and quickly. | |
The new switch design for CD-ROM Drive bay, users can easily remove Drives without screws. and Lian- li designer have use rubber pad to absorb the vibration to reduce the noise, and to firmly hold it in place. | |
The PC-B71 is equipped with SATA Raid HDD cage to make your life easier. You can have more time to enjoy your life, no more working with wires. It will also support Raid function. ( Support required from the M/B or SATA Raid Card chipset) | |
The PC-B71 features a door with a lock on the HDD front panel which secures the SATA/ SAS Hot Swappable HDD Cage inside the case. It supports up-to seven HDDs. Users can easily switch HDDs as needed. The SATA / SAS back panel doesn’t feature any raid natively and functions as a pass-through and so it requires a compatible motherboard for the RAID and hot swap SATA / SAS functions. | |
Silent Performance
There are two silent 14cm ball-bearing intake blue LED fan (1200RPM) which brings cold air into the chassis | |
The drive bay cage has with rubber pads to absorb the vibration and reduce the noise. | |
The Front panel is mounted with a specially made plastic kit, this prevents the metal parts touching each other, and reduces the noise by reducing the vibration. | |
Lian Li designers consider every detail. The PC-B71 is equipped with anti-vibration clips and grommets on the chassis, to absorb the noises created by vibrating and spinning parts. The EMI spring on the top cover absorbs the vibrations, without interfering with the side panel. | |
Chassis has anti-vibration grommets to support the motherboard tray. The anti-vibration spring clips on the chassis push against the side panel to reduce the chance of vibration, while enhancing the perfect fit between the removable parts. | |
There is sound insulation material on the internal side of the 2mm side panel to reduce the noise level. | |
Huge internal space for power supply units, there are anti-vibration rubber strips to reduce the noise. | |
The aluminum case stand with rubber pad to absorb the vibration to reduce the noise. | |
Thermal Solution
PC-B71 is using "Thermal Tunnel" solution, the two 140mm fans in the front input cold air into the system, the two 120mm fans and the PSU's fan draw the hot air out as a heat circulation. | |
PC-B71 Features a three-speed fan controller, user can adjust the fan speeds to get the best balance between silent and increased cooling. Factory setting are default at Mid Speed, but user can adjust the fan speed as needed. | |
There are two 140mm intake blue LED fan on PC-B71, The fan can output high air flow volume with lower RPM to push the cold air through the HDD rack. It connected to a three-speed controller, factory setting at middle(980RPM), user can adjust it to suit. | |
There is a 120mm exhaust fan behind HDD cage to draw the hot air out, and improve the air flow inside the chassis. | |
There is a 120mm exhaust fan at the rear to draw the hot air out, and improve the air flow inside the chassis. | |
The PCI bracket with vent holes adds extra ventilation possibilities for improved airflow for optional graphics card coolers. | |
User Friendly Design
Multi-media port connectors follow international specification standards, with one connector for easy installation. Audio supports HD Audio or AC97 Audio. The dual design is for better compatibility options. All I/O ports on the top cover, allow for easy access, there is also a dust-free cover to protect these connectors. | |
The case front intake fans has equipped air filter, to stop dust entering the chassis. These air filter were washable, envirnoment friendly | |
PC-B71's front panel can be easily removed, with all the switches and wires mounted in the chassis, and therefore out of the way. | |
PC-B71 has equipped a server grade graphics card holder to hold the graphics card in position, avoid from bending and damage. | |
There is a special gear for cables to pass through, allow uesr convenient manage the cables. | |
There is a lock on the door in the HDD cage to protect your HDD’s. The included grill and air filter for the intake fan are easily removed and washable. | |
To release the solid side panel, simple just un-do the thrumb screw, and pull the latch. There is a hook for security lock. |
Model | PC-B71B |
Case Form Factor | Full ATX Tower |
Dimensions | 220mm x 595mm x 590mm (W,H,D) |
Front Panel Material | Aluminium |
Body Material | Aluminium |
Side Panel Material | Aluminium |
Side Panel Material | Aluminium |
External Colour | Black |
Internal Colour | Silver |
5.25" External | 5 ( one for 3.5 inch convertor) |
3.5" External | 1 |
3.5" Internal | 10 |
Expansion Slots | 7 |
Full / E-ATX / Extended ATX | Yes |
Standard ATX | Yes |
Micro ATX | Yes |
Installed Fans | 2 x 140mm blue LED fan (1200RPM)
2 x 120mm Ball-Bearing Fan (1500RPM) |
Connectivity | 4 x USB2.0
1 x IEEE1394 1 x ESATA 1 x HD+AC97 Audio |
Get your order delivered the next working day for £5.99, available when ordering Monday - Thursday and before 17:00 on that day if the product is in stock and your payment has cleared.
Get your order delivered the next working day before 12:00pm for £10.98, available when ordering Monday - Thursday and before 17:00 on that day if the product is in stock and your payment has cleared. Some orders if via PayPal and the first customer order may not clear in time.
If you need your order at the weekend, for £12.58, you can specify the day you wish to have it delivered to you, Saturday or Sunday providing your order has been placed by 17:00 on the Friday before.
Economy delivery is available on all orders of any value being shipped within the UK.